.svg "DEL Logos-orig (1)")
The powerful PX-30 combines the design elements and functionality of the PX-20 and more with the addition of two moisture scales – one for baled paper and a reference scale for relative readings. Bluetooth® connectivity to the Delmhorst EDGE ® app enhances your ability to ensure precise readings and export data from anywhere for documentation and analysis.
5%-40% for baled scrap paper
PX-30W/CS : Order as PX-30W/CS. (Price: $535.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Non-insulated pin and retainer with 5/16" penetration. Standard on the JX series meters with built-in pins. May also be used with the 2-E and 4-E electrodes. (Not for use with the 2000 series) Use on wood up to 6/4 (1 ½”), drywall and masonry.
2498/A-100/24 (Price: $54.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
This moisture content standard is great for verifying that your P-2000 or RDM-3P paper moisture meters are in calibration. With two electrical resistance values (6% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-2 is also available with a letter of certification traceable to NIST.Please Note:
For P-2000 meters with serial numbers up to 19389, please order the MCS-2
For P-2000 meters with serial numbers of 19390 and above, please order the MCS-2X.
(Price: $45.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
Double roller type for measuring moisture content on a moving web.
(Price: $400.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block. Used for veneer.
(Price: $130.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order.
(Price: $200.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications:
2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration.
(Price: $90.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs.
(Price: $325.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation.
(Price: $325.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Prods for testing standard and high density bales (requires H-4 Handle).
830-2 - 10" prod (Price: $67.00)
830-3 - 18" prod (Price: $73.00)
830-4 - 36" prod (Price: $90.00)
830-5 - 12" prod (Price: $82.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.
(Price: $80.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.