.svg "DEL Logos-orig (1)")
Essential for any quality control technician in the paper industry, especially useful for testing cores, paperboard, and corrugated stock with integral pins or available external electrodes. This rugged meter has an ergonomic design with an easy grip handle and large tactile buttons for comfort and usability.
“Low Batt” warning with audio
Auto off timer. Set to 1m, 4m, or 10m
Integral contact pins penetrate max 5/16in
Compatible with existing Delmhorst electrodes
Power: 2x AA Alkaline batter
Temperature Correction Range: 0-255° F (-18-124°C)
QR code on meter for easy access to support materials and meter registration
Size: meter only - 8.65in x 2.85in x 1.60in (21.97cm x 7.24cm x 4.06cm)
Weight: meter only – 8.6oz (244gm)
Hard plastic carrying case included
2-year warranty on manufacturer’s defects. Bonus warranty with on-line registration
PX-20W/CS : Order as PX-20W/CS. (Price: $435.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Non-insulated pin and retainer with 5/16" penetration. Standard on the JX series meters with built-in pins. May also be used with the 2-E and 4-E electrodes. (Not for use with the 2000 series) Use on wood up to 6/4 (1 ½”), drywall and masonry.
2498/A-100/24 (Price: $54.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
This moisture content standard is great for verifying that your P-2000 or RDM-3P paper moisture meters are in calibration. With two electrical resistance values (6% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-2 is also available with a letter of certification traceable to NIST.Please Note:
For P-2000 meters with serial numbers up to 19389, please order the MCS-2
For P-2000 meters with serial numbers of 19390 and above, please order the MCS-2X.
(Price: $45.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
Double roller type for measuring moisture content on a moving web.
(Price: $400.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block. Used for veneer.
(Price: $130.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order.
(Price: $200.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications:
2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration.
(Price: $90.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs.
(Price: $325.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation.
(Price: $325.00)
*ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.