|
Electrodes
Interchangeable with Delmhorst Moisture Meters
| 2-E |
|
|
|
- Two
pins
- 5/16"
penetration
- Use
on plaster, masonry, paper tubes, wood
|
|
| 4-E |
|
|
|
- Four
pins
- 5/16"
penetration
- Use
on wood up to 1 1/2" thick
|
|
| 12-E |
|
|
|
- Double-roller
type
- Use
on a moving web of paper or textile
|
|
| 15-E |
|
|
|
- Eight
pins
- 1/8"
penetration
- Use
on veneer, cardboard, leather, paper
|
|
| 18-ES |
|
|
|
- Two
pins (insulated)
- 3
1/4" penetration
- Use
on heavy timber, poles and ties
- Also
available as type18-ED with depth gauge
|
|
| 19-E |
|
|
|
- Two
blades
- 5"
long
- Use
on stacked paper, veneer
|
|
| 19-E/STC |
|
| 
|
- Two
5'' long blades, bent to a 35° angle
-
Teflon coated w/ exposed tips
-
Use to check behind trim and baseboard molding
|
|
| 21-E |
|
|
|
- Two
pins (insulated)
- 3
1/4" penetration
- Use
on EIFS, insulation and roofs
- Also available as a 21-ET with a tapped handle. This feature allows you to attach a threaded extension pole -- great for checking moisture in high and hard to reach places.
- Also available as a 21-E/001 with 7" pins for EIFS
|
|
| 22-E |
|
|
|
- Two
pins
- 1/2"
penetration
- Use
on plaster, masonry and wood
- Will
also take #496, insulated pins
(1
1/8" penetration)
- Also available as a 22-ET with a tapped handle. This feature allows you to attach a threaded extension pole -- great for checking moisture in high and hard to reach places.
|
|
| 26-ES |
|
|
|
- Two
pins
- 1
1/8" penetration
- Use
to measure moisture content in wood at different
levels of penetration
- Ideal
for shell and core tests to detect moisture
gradients and to test lumber with wet surfaces
- Also available as type 26-ED with depth gauge
26-ES Parts List
|
|
| 30-E/C |
|
|
|
- Used
for bales,
- 9
1/2" insulated pins with 8 1/4" penetration,
- eliminate
the effect of surface moisture
|
|
| 37-E/C |
|
|
|
- Eight
pins (insulated)
- 3/4"
penetration
- Use
for yarn
|
|
| 42-EB |
|
|
|
- Two
pins
- 3/8"
penetration
- 3
ft. T-handle
- Use
for boards in stacks
- Also
available in 4 1/2 “ ft. length
|
|
| 43-E |
|
|
|
- Clamp
type
- Use
for flat paper stock, fiberboard, thin veneer
|
|
| 55-E |
|
|
|
- Leaf
type
- Use
for paper or textile on a moving web
|
|
| 59-E |
|
|
|
- Surface
type
- Use
for granular material
|
|
| H-4 |
|
| 
|
- Electrode
handle
- Use
with 830 series, 831 and 832 electrodes
|
|
| HP-1 |
|
 |
- Makes
pilot holes in stucco to reduce pin damage
|
|
| #830 |
|
|
|
- Co-axial
prod
- Use
on baled or shredded material
- Available
in 10", 18" or 36"
|
|
| #831 |
|
|
|
- Multi-pin
prod
- 1/2"
penetration
- Use
on chopped hay, sawdust and shavings
|
|
| #832 |
|
|
|
- Multi-pin
prod
- 3
1/4" penetration
- Use
on bagged seed or grain
- Also
on sawdust and shavings
|
| 1235
10" Prod |
|
|
|
Used
for testing standard bales. Attaches directly to the connector
on top of the meter.
|
| 830-T/C |
|
|
|
Used
for modules, heavy duty steel, 36" T-handle
|
|
|
